Item No.: HM-211

  Introduction: -

  • Cast Iron three piece ball valve is designed to cater the needs of industry for trouble free & long lasting services. Three piece design facilitates the quick replacement of PTFE Rings or S.S. Ball if required so. Close-tolerances & finishing is maintained for the better performance and less torque is required to operate the value. Non-blow off spindle gives the maximum safety for the operators.

  Design: -

  • 'HM' Cast Iron Ball Valves are three piece design, floating S.S. 304 ball & PTFE Rings, PTFE Gland Packing on both the sides of SS 410 stem. Quarter turn, lever operated (M.S. Flat Lever with sleeve for and up to 40MM and C.I. Lever with 'C' Class extension pipe with locking facility for higher sizes.

  End Connections: -

  • 'HM" Cast Iron Ball Valves are manufactured to BS10 Table 'F' and BSP Screwed Ends.

  • Any other type of flange connection may be supplied if required by the customer.

  Hydraulic Testing: -

  • Body Testing – 500 Psig (34 kg/cm²)

  • Seat Test Pressure – 300 Psig (20 kg/cm²)

  • Maximum working Pressure - 200 Psig (14 kg/cm² (at 40º C)

  • Temperature Range - 10º to 200º C

  Finishing: -

  • 'HM' Cast Iron Ball Valves are spray painted with best quality industrial primers & paints for a sparking & long lasting finish. Paint facility is available in-house.

  Warrantee: -

  • 100% Leak Proof against the working pressure.

  • 100% warrantee of workmanship.

  • Free replacement against any manufacturing defect found within six months of operation or 1 year from the date of supply (whichever is earlier) provided the same is returned to us without misuse & careless handling

   Applications: -

Steam Water Oil Air Gas
 

 

Domensions Code 15 20 25 32 40 50 65 80 100
End to End (Screwed) L-1 80 93 107 118 126 138 166 185 244
Centre to Lever Top Screwed H-1 65 65 75 78 100 104 130 140 205
Centre to Lever End Screwed LL-1 125 125 125 173 173 203 262 262 338
Face to Face (Flanged) L 120 130 138 168 175 193 206 218 273
Flange Dia D 96 102 121 134 140 165 184 203 229
Flange Thickness (Min.) T 12.8 12.8 12.8 16 16 19 19 19 24
Centre to Lever Top (Flanged) H 70 76 95 112 116 135 116 134 205
Centre to Lever End (Flanged) LL 145 145 156 176 178 203 260 260 345
Raise Face Dia E 35 43 51 63 73 92 105 127 157
Raise Face Thickness F 2 2 2 2 3 3 3 3 3

Note: Tolerance - ±1.5MM on end to end/face to face dimensions. ±1MM on diameter of flange up to 80MM & ±1.5MM on 100MM + 1.5MM in thickness of flange upto 32MM size & +3MM on 40 to 100MM Sizes.

Sr. No.   Description Material Specifications
1   Body Cast Iron IS:210 Gr FG-200
2   Ball S.S. AISI:304
3   Stem S.S. 13% Cr. AISI:410
4   Nuts, Studs, Stopper & Lever Mild Steel IS:226
5   Body Seat Ring, Gland Packing & Stem Seal Teflon PTFE
6   Lever Sleeve P.V.C. P.V.C.
7   Gasket Compressed Asbestos -