Item No.: HM-315

  Products Specifications: -

  • Flanged Ends to BS-4504 Part-I Table-40/DIN-2545 RF.

  • Rising Stem Type, O/S & Yoke Type.

  • Angle Pattern.

  • Renewable S.S. (AISI 410) Trim.

  • Bolted Bonnet.

  • Handwheel Operated.

  Salient Features: -

  • Backseat provision for under pressure re-packing.

  • Full flow design / Minimum pressure drop.

  • Non asbestos gland packing / gasket.

  • Ample Depth of Stuffing Box.

  • Bigger Diameter Handwheel for Lesser Torque.

  Testings: -

  • Hydraulic test pressure – 1100 Psig (76 Bar).

  • Maximum saturated steam working pressure – 550 Psig (38 Bar).

  • Maximum working temperature - 425º C (797º F).

  Certifications: -

  • IBR Test Certificate in Form-IIIC, issued by The Director Of Boilers, Punjab is furnished with each valve.

   Applications: -

Steam Water Oil Air Gas

   
 

 

Nominal Size 15 20 25 32 40 50 65 80 100 125 150 200
L 130±1 150±1 160±1 180±1 200±1 230±2 290±2 310±2 350±2 400±2 480±3 600±3
H 205 210 240 250 275 290 330 360 410 440 580 640
ØW 125 125 160 160 200 200 250 250 315 315 400 400
ØD 95 105 115 140 150 165 185 200 235 270 300 375
T 16 18 18 18 18 20 22 24 24 26 28 34
ØR 45 58 68 78 88 102 122 138 162 188 218 285
f 2 2 2 2 3 3 3 3 3 3 3 3
P. No.   Description Material Remarks
1   Nut M.S. -
2   Washer M.S. -
3   Handwheel C.I. IBR 86 to 93 Gr.A
4   Bush S.S. AISI 410
5   Locking Screw S.S. AISI 410
6   Gland Flange C.S. IBR 73 to 80
7   Gland S.S. AISI 410
8   Packing Graphite Asbestos / Non Asbestos
9   Bonnet C.S. IBR 73 to 80
10   Disc Nut S.S. AISI 410
11   Disc S.S. AISI 410
12   Body C.S. IBR 73 to 80
13   Stem S.S. AISI 410
14   Stud Bolts & Nuts Carbon Steel BS:916
15   Stud & Nuts Carbon Steel BS:916
16   Gasket C.A.F. BS:2815
17   Back Seat Bushing S.S. AISI 410
18   Body Seat Ring S.S. AISI 410